Eight coils. Open any one in a click.
A library of pre-built designs across every operating band the simulator supports. Each opens directly in the dashboard with all 13 parameters filled in — clone it, modify it, export a variant for your fab.
Filter by application
SAE J2954 WPT2 ground pad
300 mm × 300 mm DTC ground pad at a 200 mm gap, sized for the 7.7 kW WPT2 class. Air-core coupling baseline; ferrite backing needs a FEM check.
Compact WPT3 11 kW pad
Square Helmholtz pair sized for low-clearance vehicles. Sweep lateral offset to map how coupling holds up across the parking tolerance.
Pacemaker implant coil
12 mm circular DTC, 22 turns AWG 38. Designed for transcutaneous power at 5 mm tissue depth, 100 mW delivery.
Cochlear receiver
8 mm sub-skin coil, 18 turns. Tuned for stable coupling across the tissue gap, with a field check against ICNIRP and IEEE reference levels.
NFC reader antenna
Square spiral on 4-layer FR-4. Optimised for 50 mm read range with 3 µH self-inductance.
Battery-free sensor tag
Receive coil for harvesting 100 µW at 30 cm. Rectifier-aware impedance match for sub-mW MCU loads.
Kurs 2007 geometry
The loop-pair geometry from the 2007 Science paper as a clone-and-modify starting point for coupling studies.
Babic & Akyel 2008 — coaxial
Coaxial circular pair: the solver evaluates the same Maxwell–Neumann closed form that Babic & Akyel tabulate, so you can check it spacing by spacing.